The vapor device industry has been requesting FDA for years to exempt devices from the Tobacco Control Act Section 904(a)(1) ingredient listing requirement, respectfully arguing, among other things, that the information required for non-consumable hardware products and components provides no meaningful information to FDA that would help it protect the public health.[1] On April 13, 2018, just 25 days before the reporting deadline for large manufacturers of deemed tobacco products, FDA published a revised Guidance for Industry: Listing of Ingredients in Tobacco Products. FDA now intends to enforce the ingredient listing requirement only with respect to those tobacco product components or parts that are made or derived from tobacco, or contain ingredients that are burned, aerosolized or ingested (i.e., consumed) during use. Although the revised guidance is late – and comes after many companies have spent considerable time and funds to comply with the reporting requirement – it is welcome news for the industry.

The ingredient listing deadlines for the applicable components and parts of deemed finished tobacco products[2], however, have not changed – large manufacturers of such products still have only until May 8, 2018, while small-scale manufacturers[3] have until November 8, 2018.

Manufacturers of vapor devices and finished deemed tobacco product components and parts should keep in mind that FDA’s decision to exempt such products from ingredient listing does not change the fact that these products are still subject to FDA’s premarket authorization requirements. It remains the case, for example, that any new vapor device intended for introduction into the U.S. market after August 8, 2016 requires Premarket Tobacco Product Application (PMTA) authorization (which requires ingredient information, along with a significant amount of additional data) before it can be marketed, and any devices on the market on August 8, 2016 have until August 8, 2022 before PMTAs are due, and can remain on the market after that date only if PMTAs for the products are accepted by FDA for review.

Components and Parts Subject to Ingredient Listing

The revised guidance provides examples of “consumable” components and parts that still require ingredient listing including, but not limited to:

  • Cigar filler;
  • Cigar binder;
  • Cigar wrapper;
  • Pipe tobacco;
  • Waterpipe tobacco;
  • E-liquids;
  • Cigarette tobacco;
  • Cigarette paper;
  • Smokeless tobacco;
  • Roll-your-own (RYO) tobacco;
  • RYO rolling paper;
  • RYO tube; and
  • Cigarette filter that contains any ingredient that burns, aerosolizes, or is ingested during use (e.g., cigarette filter with menthol because the menthol will aerosolize during cigarette smoking).

Ingredients of tobacco product components and parts that are not made or derived from tobacco or consumed during use, e.g., pipes, hookah apparatus, vapor devices, etc., need not be submitted to FDA. Examples of components or parts for which FDA does not intend to enforce the ingredient listing submission requirement at this time include, but are not limited to:

  • Electrical components including, but not limited to, batteries, charging systems, circuit boards, wiring, and connectors;
  • System software;
  • Digital display, lights, and buttons to adjust settings;
  • Connection adapters;
  • Cartomizers;
  • Coils;
  • Wicks;
  • Tanks;
  • Mouthpieces;
  • Pipes;
  • Waterpipes;
  • Hoses;
  • Bowls;
  • Charcoal; and
  • Cigarette filter that does not contain any ingredient that is burned, aerosolized, or ingested during tobacco use.

Based on this, e-liquid manufacturers need only provide ingredient information on the liquid component of their products, not other non-consumable components such as bottles, drippers and packaging. FDA expects to receive ingredient information for these non-consumable components and parts during its pre-market review of finished tobacco products (e.g., Premarket Tobacco Applications and Substantial Equivalence Reports).

Single Submissions for Multiple Products

With respect to consumable components and parts, the revised guidance also now makes clear that there are a number of situations where ingredients for multiple products may be listed together under a single submission, provided all of the different brands/subbrands and product sizes for the associated products in the submission are identified. Examples of situations allowing a single ingredient listing for multiple products are provided in the guidance as follows:

  • Identical per weight composition of ingredients for tobacco products sold under multiple brands/subbrands:
    • Pipe tobacco with identical per weight composition of ingredients sold under 30 brands/subbrands;
    • E-liquids with identical per weight composition of ingredients sold under 200 brands/subbrands; and
    • Waterpipe (shisha) tobacco with identical per weight composition of ingredients sold under 15 brands/subbrands.
  • Identical per weight composition of ingredients for tobacco products sold in multiple product sizes:
    • E-liquid with identical per weight composition of ingredients sold in volumes of 30mL, 60mL, 90mL or sold in a range of product sizes (e.g., 20mL-100mL);
    • Pipe tobacco with identical per weight composition of ingredients sold in product sizes of 5g, 10g, 50g;
    • Waterpipe (shisha) tobacco with identical per weight composition of ingredients sold in product sizes of 100g, 200g, 500g; and
    • Pouched snus with identical per weight composition of ingredients sold in a can of 12 snus sachets or a can of 15 snus sachets.

For open-system e-liquids more specifically, the revised guidance indicates that manufacturers can satisfy the ingredient listing requirement by providing one listing that corresponds to multiple products if the manufacturer sells e-liquids that (1) are identical in chemical composition to one another or (2) are identical in chemical composition to one another except the quantities of propylene glycol (PG), vegetable glycerin (VG), and/or nicotine differ.8 For example:

  • E-liquids with identical nicotine concentrations (e.g., 0.5 mg/ml nicotine) but varying PG/VG ratios (e.g., 20/80, 50/50, 80/20) and all other ingredients having identical per weight composition.
  • E-liquids with identical PG/VG ratio (e.g., 50/50) but different nicotine concentrations (e.g., 0.5, 1.0 1.5 mg/ml) and all other ingredients having identical per weight composition.
  • E-liquids with varying PG/VG ratios (e.g., 20/80, 50/50, 80/20) and different nicotine concentrations (e.g., 0.5, 1, 2 mg/mL) with all other ingredients having identical per weight composition.

However, changes to relative ratios of ingredients or to the quality or type of an ingredient will require separate submissions. For e-liquids, the revised guidance provides several examples of when separate submissions to correspond to each brand/subbrand of a product are required:

  • E-liquids that have identical PG/VG chemical structure, but the nicotine chemical structure is different (e.g., moving from free nicotine to nicotine salt), even with identical per weight composition of all other ingredients.
  • E-liquids that have identical PG/VG chemical structure and identical nicotine chemical structure but where the per weight composition of all other ingredients is different in any way (e.g., increased amount of cherry flavor #1 added when all other ingredient ratios stay the same).
  • E-liquids where the grade of the PG/VG is different in any way (e.g., percent purity changes).

For more detailed background on the ingredient listing information needed and submission process, see here.