Describe the significance of, and developments in, the automotive industry in the market.
According to the Canadian Ministry of Foreign Affairs, Trade and Development Canada, the automotive industry is Canada’s largest manufacturing sector and accounts for 15 per cent of North American vehicle production (2.4 million units). For foreign investors in this sector, Canada offers a strategic location in the heart of one of the world’s largest and most lucrative automotive markets. There are 37 high-volume assembly plants within a 500km radius of the Windsor-Detroit border. These plants have produced up to 7.4 million vehicles in one year.
Canada has one of the lowest cost structures among advanced economies, with the lowest cost structure among G7 countries and an overall cost advantage of 8.2 per cent over the US in the automotive sector. According to a KPMG study, automotive parts operations based in Canada typically enjoy an 11.2 per cent labour cost advantage compared to their US-based counterparts.
Canada’s automotive manufacturing sector directly employs over 125,000 workers, accounts for 11 per cent of manufacturing GDP and currently generates revenues of C$103 billion according to Statistics Canada. Passenger and commercial vehicle assembly plants in Canada employ over 38,000 workers with 2.4 million units of installed capacity. Original equipment manufacturers (OEMs) such as Ford, Fiat Chrysler, General Motors, Toyota and Honda each have assembly operations in Canada employing thousands of people. Typically, about 85 per cent of the vehicles manufactured in Canada are exported. The automotive supply sector in Canada consists of some 450 companies, 1,250 facilities, C$27.9 billion in annual shipments and nearly C$13 billion in exports. The manufacturing sector is facing some headwinds owing to trade concerns and the availability of inexpensive labour in other markets. General Motors recently announced that, after 100 years of operation, it will be closing its plant in Oshawa, Ontario, at the end of 2019, once one of the largest automotive assembly plants in the world.
Most of the OEM assembly plants and parts manufacturing facilities are located in Southwestern Ontario. Ontario is the top-ranked vehicle assembly jurisdiction in North America. In addition, Ontario has over 700 parts suppliers including large Tier I manufacturers, such as Magna, Linamar, Stackpole and Martinrea. The region also includes a growing technology hub (second only to California) in close proximity to Toronto and the University of Waterloo. This co-location is important as communications technology plays an increasingly key role in the development of connected and autonomous vehicles.
The Canadian automotive manufacturing industry has grown strongly in value and volume in recent years following decline in 2009. In past years, trucks have had the highest volume in the Canadian automotive manufacturing industry with total sales of 58 per cent of overall volume.Regulation
What is the regulatory framework for manufacture and distribution of automobiles and automobile parts, such as homologation process as well as vehicle registration and insurance requirements?
Federal and provincial levels of government share the responsibility for motor vehicle safety oversight. The federal government is responsible for the safety standards for new and imported vehicles of prescribed classes, tyres and equipment for use in the restraint of children and disabled persons. The provinces are responsible for driver licensing, vehicle registration and operational use.
The Minister of Transport (Transport Canada) has the responsibility for the administration and enforcement of the Motor Vehicle Safety Act (MVSA). The MVSA applies to companies that manufacture regulated vehicles or vehicle equipment in Canada, companies that distribute vehicles or equipment obtained from those manufacturers to other persons for the purpose of resale, importers of regulated vehicles or equipment into Canada for the purpose of sale, and persons who import regulated vehicles previously sold at the retail level in the US. The MVSA also regulates the temporary importation of non-compliant vehicles and equipment.
Each provincial government is in charge of various aspects of transportation in its respective province, including the establishment and maintenance of the provincial highway system, the licensing and training of vehicles and drivers, and the policing of provincial roads. For example, in Ontario, the Ministry of Transportation has the responsibility for the administration and enforcement of the Highway Traffic Act (HTA), which regulates the licensing of vehicles, classification of traffic offences, administration of loads, classification of vehicles and other transport-related issues. The provinces also regulate automobile insurance.Development, manufacture and supply
How do automotive companies operating in your country generally structure their development, manufacture and supply issues? What are the usual contractual arrangements?
OEMs and supply chain
OEMs operating in Canada use terms and conditions for contracting with parts suppliers. These terms and conditions are generally based on each OEM’s global standards. The OEMs resist any variance from their standard terms and conditions.
The supply chain is segregated into distinct tiers. For example, in a three-tier supply chain, the Tier I supplier sells a finished assembly product directly to an OEM. The Tier II supplier, however, sells its parts, which would reflect some value-added labour and minor sub-assembly, to the Tier I supplier for use in the production of its components. The Tier III supplier will sell engineered raw materials, such as rolls of sheet steel, to the Tier II supplier. It is not uncommon for suppliers to straddle more than one tier. For example, a supplier may be a Tier I and Tier II supplier, selling some parts directly to an OEM and other parts to other Tier I suppliers.
In the Canadian automotive industry, just-in-time inventory and purchase orders containing little or no long-term purchase obligations are common.
Distribution and retail
Automotive companies typically contract with distributors and dealers to sell their vehicles, parts and accessories. The substantial majority of these distributors and dealerships are independently owned and the relationship with the distributor or dealer is governed by a written contract.
Automobiles are subject to various consumer protections. There is no ‘cooling-off period’ in Canada for motor vehicle contracts, so the consumer must be sure of his or her decision before signing the contract. In most cases, the contract will be binding. When a consumer buys a vehicle, the dealer must provide the most accurate information available about the vehicle’s history and key features. If the dealer omits certain information, the buyer will have 90 days to cancel the contract. Additional consumer protections apply when the purchase of the vehicle is financed, which is often the case.
The Canadian Motor Vehicle Arbitration Plan (CAMVAP) is a free arbitration programme from participating manufacturers. Vehicle dealers must let the buyer know if the car being purchased qualifies for this programme. If it does, the programme can assist the consumer in dealing with disputes about manufacturing defects.Distribution
How are vehicles usually distributed? Are there any special rules for importers, distributors, dealers (including dealer networks) or other distribution partners? How do automotive companies normally resolve restructuring or termination issues with their distribution partners?
Agents and distributors
A foreign automotive company may wish to offer its products or services in Canada by means of an independent agent or distributor. An agent will usually be given limited authority to solicit orders for acceptance at the foreign head office, and will not normally take title to the goods or provide services to the customer. A distributor, on the other hand, usually takes title to the goods and offers them for resale, either directly to the customer or through dealers or retailers.
The relationship with an agent or distributor should be established by contract. Although provincial law does not generally prohibit the termination of an agent or distributor, the courts will require reasonable notice to be given, or damages in place of notice, in the absence of an agreed contractual term for the relationship. The nature of the relationship determines whether the arrangements are subject to franchise legislation.
Distribution and dealers
Distributors and dealerships, which are most often independently owned, are the most common intermediaries between automotive companies and the retail consumer and fleet markets. Dealerships primarily deal parts and accessories to retail consumers while authorised parts distributors primarily distribute parts and accessories to retailers.
All provincial governments have some form of legislation regulating motor vehicle dealers. The nature of this legislation varies from province to province, as do its scope and comprehensiveness. The general aim of legislation concerning motor vehicle dealers is to regulate the trade in a valuable and dangerous commodity that is susceptible to theft and raises consumer protection issues, and provides a compensation system in the event of a motor vehicle dealer’s misconduct.
With certain exceptions, all types of vehicles that Canadians import which are designed to be driven on public roads, and those designed for off-road use, must comply with the MVSA. Once modified (other than having general repairs or routine maintenance), the vehicle no longer maintains its original factory-issued certification. This certification is required for importation into Canada. Importing an electric or hybrid vehicle is no different from importing any other type of vehicle. The MVSA does not regulate shipments of individual parts, with the exception of tyres, child car seats and booster seats.
Franchising is not as heavily regulated in Canada as it is in a number of other jurisdictions. In Canada, franchising is a purely provincial matter. About half of the provinces currently have franchise legislation in effect. While there are slight differences in the legislation and regulatory requirements of each province, they are all derived ultimately from the US model of mandated disclosure by a franchisor to prospective franchisees, coupled with a duty of good faith and fair dealing owed by each party to the other, and a right of franchisees to associate freely among themselves.Mergers, acquisitions and joint ventures
Are there any particularities for M&A or JV transactions that companies should consider when preparing, negotiating or entering into a deal in the automotive industry?
As in any other industry, a threshold question in any automotive acquisition is whether to purchase shares or assets. In addition to the usual considerations, a purchaser and vendor of an OEM or parts manufacturer may want to proceed by way of share purchase in order to avoid the right of members of the dealer network to consent to the assignment of the dealership agreements.
In the case of an acquisition of a large OEM or parts manufacturer, regulatory considerations are important, particularly potential pre-clearance under the Competition Act and the Investment Canada Act (ICA). In addition to such regulatory approvals, third-party consents from dealers, suppliers, landlords, equipment owners, creditors and shareholders are typical. Under most Canadian corporate statutes, if a sale involves the disposition of all or substantially all of a corporation’s assets, shareholders must approve the transaction by special resolution.
Joint venture structuring
As is sometimes done in the Canadian automotive industry, two or more parties may engage in a joint venture or syndicate where they collaborate in a business venture. There is no specific statutory definition or regulatory scheme for joint ventures, at either the provincial or federal level, although they are not uncommon. A well-known Canadian example of a joint venture is a large OEM assembly plant, Canadian Automotive Manufacturing Inc (CAMI). CAMI is now owned by General Motors but commenced as a joint venture with Suzuki.Incentives and barriers to entry
Are there any incentives for investment in the automotive market? Are there barriers to entry into the market? What impact may new entrants into the market have on incumbents?
Incentives for investment
Canadian automotive manufacturers are recognised for their strong capacity in launching complex and advanced automotive manufacturing projects due to their world-class plant and labour quality. Canadian assembly plants have won one-third of all JD Power plant quality awards in North America. The industry is highly concentrated in Ontario, with manufacturing centres also located in Quebec, Manitoba and British Columbia.
Foreign investors rely on strong supplier and research capabilities in lightweight metals, biomaterials and composites, advanced safety systems, software and the ‘connected car,’ alternative powertrains (electric vehicles, fuel cells, natural gas and biofuels), and vehicle safety and testing. Manufacturers that do research and development in Canada take advantage of Canada’s Scientific Research and Experimental Development Tax Incentive Program.
Other programmes are in place at the retail level in some Canadian jurisdictions to incentivise the adoption of new technology.
Barriers to entry/new entrants
The ICA is a federal statute of broad application regulating investments in Canadian businesses by non-Canadians. Investments by non-Canadians to acquire control over existing Canadian businesses or to establish new ones are either reviewable or notifiable under the ICA. The rules relating to an acquisition of control and whether an investor is a ‘Canadian’ are complex and comprehensive.
Subject to certain exceptions, an acquisition of a Canadian business by a non-Canadian investor controlled by persons who are residents of World Trade Organization member countries (WTO investors) is reviewable where the enterprise value is C$1.045 billion or more. There are additional restrictions in place in respect of certain prescribed circumstances such as investments by non-WTO investors and by state-owned enterprises.
Product safety and liabilitySafety and environmental
What are the most relevant automotive-related product compliance safety and environmental regulations, and how are they enforced? Are there specific rules for product recalls?
Product compliance and safety
The MVSA was recently amended to introduce broad powers for Transport Canada to order manufacturers to submit a notice of defect or non-compliance when Transport Canada considers it would be in the interest of safety. The Motor Vehicle Regulations Enforcement Branch conducts post-market surveillance and oversight of the regulated community through programmes of compliance inspection, testing, corporate audits, and the investigation of alleged safety-related defects and recall monitoring.
National Safety Marks (NSMs) are used to indicate the compliance of a vehicle or equipment with the MVSA and the related regulations and safety standards. Transport Canada authorises their use and any company that intends to use an NSM must apply to Transport Canada to obtain this authorisation.
The Canada Motor Vehicle Safety Standards (CMVSS) prescribe the minimum performance levels that vehicles and equipment must meet. Each CMVSS standard includes performance requirements against which regulated vehicles and equipment are measured and compliance determined. These standards may include Transport Canada-approved Motor Vehicle Safety Test Methods, Technical Standards Documents or third-party published test methodologies.
The Defect Investigations Group has a mandate under the MVSA to investigate complaints relating to alleged manufacturing safety defects. At times these investigations may lead to safety recall campaigns or safety advisory publications.
Vehicular greenhouse gas emissions in respect of light duty vehicles are regulated under the federal Environmental Protection Act. There are plans to regulate heavy duty vehicles and engines for model year 2019 and beyond. In addition, the federal On-Road Vehicle and Engine Emission Regulations and the Sulphur in Gasoline Regulations impose stringent national emission standards.
At the end of 2017, a federal government agency, Environment and Climate Change Canada, released a regulatory framework outlining the proposed design of Canada’s Clean Fuel Standard (Standard), which is aimed at assisting in meeting Canada’s goal of lowering greenhouse gas emissions to a target of 30 per cent below 2005 levels by 2030 as part of Canada’s participation in the Paris Agreement. The Standard will include reductions in the carbon footprint of transportation fuels and will require increases in renewable fuel content or the purchase of credits that can be generated through the deployment of energy sources that offset fossil fuels, such as electric vehicles.Product liability and recall
Describe the significance of product liability law, and any key issues specifically relevant to the automotive industry. How relevant are class actions or other consumer litigation in product liability, product recall cases, or other contexts relating to the automotive industry?
There are three key categories of claims typically made in the nature of product liability claims: claims against manufacturers alleging negligence in the design or manufacture of vehicles; claims against manufacturers and dealers alleging the breach of express or implied warranties of fitness and quality; and claims against manufacturers and dealers seeking consumer protection remedies based on unfair business practice provisions of consumer protection legislation or breach of the misleading advertising provisions in the federal Competition Act.
In negligence, a plaintiff may recover for bodily injury or property damage (and in some specific circumstances, economic loss) if the plaintiff can establish a duty of care, a breach of the applicable standard of care, and damages caused by the alleged breach. These claims typically assert negligence in design, manufacture or failure to warn potential users of the product’s inherent dangers.
A party to a purchase or supply contract is entitled to sue for damages for breach of contract or breach of an express warranty, or both, if the product does not comply with express contractual or warranty terms. In some jurisdictions, legislation imposes implied warranties regarding the fitness and quality of the automotive products sold. This legislation commonly prohibits exclusion of these statutory warranties and conditions from contracts for the sale of products to consumers. In some jurisdictions, legislation implies statutory warranties in favour of consumers by manufacturers and others in the distribution chain in certain circumstances, even in the absence of contractual privity.
The federal Competition Act provides a civil right of action for damages caused by misleading advertising in specific circumstances. Some provincial jurisdictions provide remedies to consumers against automotive dealers, manufacturers or distributors for ‘unfair practices’, including the making of false, misleading or deceptive representations. Provincial consumer protection legislation may provide consumers with relaxed criteria for recovery.
It is not uncommon for a class action alleging negligence and breach of express or implied warranties to follow a product recall. Class actions seeking consumer protection remedies are also common. To date, many class actions have been certified but relatively few class actions have proceeded to trial in Canada (outside Quebec), though this number has increased in recent years. It remains to be seen whether the availability of class actions will result in larger punitive damage awards or other changes in substantive laws. Automotive class action litigation in the consumer context is discussed in further detail below.
What competition and antitrust issues are specific to, or particularly relevant for, the automotive industry? Is follow-on litigation significant in competition cases?
Participants in the automotive industry must ensure compliance with Canada’s Competition Act, the key legislation in Canada which regulates competition. The Competition Act includes provisions that regulate civil practices (such as mergers, refusals to deal, price maintenance, exclusive dealing, tied selling, abuse of dominance, competitor collaborations and deceptive marketing practices) and those that prohibit criminal conduct (including conspiracies, bid rigging and criminal misleading advertising practices).
Over the past few years, one of the key issues for the automotive industry has been the enforcement activity of antitrust regulators in the automotive parts sector. Specifically, numerous investigations have been launched by antitrust regulators around the world concerning alleged conspiracies and bid-rigging arrangements entered into among various suppliers for the sale and supply of automotive parts. These investigations have resulted in a number of convictions and fines, including in Canada. To date, the Canadian Competition Bureau’s investigations have resulted in multiple guilty pleas and over C$80 million in fines imposed by Canadian courts.
The investigations in Canada, and around the world, have led to significant follow-on civil litigation in Canada. Section 36 of the Competition Act provides that any person who has suffered loss or damage arising out of conduct that contravenes the criminal provisions of the Competition Act has the right to commence a private right of action to recover the damages suffered, plus legal costs. Class actions alleging conspiracies and bid-rigging arrangements relating to approximately 40 different automotive parts have been launched in British Columbia, Saskatchewan, Manitoba, Ontario and Quebec. These actions seek millions of dollars in damages from the defendants (automotive parts suppliers) on behalf of both direct purchasers of the alleged cartelised products, such as OEMs, and indirect purchasers, such as consumers who purchased automobiles during the proposed class period.Dispute resolution mechanisms
What kind of disputes have been experienced in the automotive industry, and how are they usually resolved? Are there any quick solutions along the supply chain available?
Disputes in the automotive industry generally arise in three contexts: vehicle owner/lessee claims against manufacturers, distributors and dealers, claims between OEMs and their dealer networks, and claims involving OEMs and their suppliers.
Vehicle owner/lessee claims
In Canada, automotive owner/lessee claims take many forms including class action civil suits by one or more plaintiffs seeking to represent a class of owners or lessees of vehicles. These representative plaintiffs commence a civil action alleging a class wide product defect in the manufacture or design of a vehicle model or some specific part of a vehicle or alleging breaches of consumer protection legislation provisions implying warranties or prohibiting ‘false’, ‘misleading’ or ‘deceptive’ practices. These claims seek compensation or other relief against manufacturers or distributors, or both, on behalf of the entire class. In Canada, product liability class actions will often be commenced in concert with similar proceedings in the US and, increasingly, recalls of vehicles in the industry will lead to class action proceedings where a plaintiff is seeking additional economic loss damages that extend beyond the repairs called for in the recall notice.
In addition, the courts deal with many individual personal injury or property damage civil suits alleging that a product defect caused damage, usually personal injury or property damage. Another source of litigation is individual warranty claims in which vehicle owners or lessees allege defects in the manufacture of a vehicle that are not adequately repaired by a manufacturer under warranty. For these disputes, owners or lessees may seek binding arbitration under the CAMVAP, an arbitral process set up by participating Canadian manufacturers, which is available at no charge to consumers and can be accessed by consumers in all provinces and territories in Canada.
In provinces where franchise laws apply, duties of good faith and fair dealing are imposed by statute on the OEM and on the dealer. Some disputes between manufacturers and dealers in the automotive industry are determined in the courts, but most are not because roughly 90 per cent of Canada’s automobile dealers have agreed to participate with their manufacturers in a nationwide mediation and arbitration plan called the National Automobile Dealer Arbitration Program (NADAP).
Disputes between OEMs and their suppliers can be determined in court proceedings in Canada, but most supplier agreements will include mandatory mediation and arbitration clauses that require that disputes be determined by way of private alternative dispute mechanisms. The exception is when suppliers are added as third parties to ongoing court proceedings involving product liability and product quality claims made by consumers against OEMs. Increasingly, manufacturers are pursuing suppliers in claims for contribution and indemnity in the context of product liability and product quality class action proceedings as well as other civil product liability proceedings.Distressed suppliers
What is the process for dealing with distressed suppliers in the automotive industry?
Canadian automotive parts suppliers that have undergone formal insolvency proceedings in the past several years include Tiercon Industries, Hunjan International, AutoSystems Manufacturing, AG Simpson and Ajax Precision Manufacturing.
The statute of choice for the restructuring of an insolvent company of significant size and complexity is the Companies’ Creditors Arrangement Act (CCAA). To qualify, a debtor company (or its corporate organisation) must have in excess of C$5 million in debt. The CCAA is a short, flexible statute that allows for wide judicial discretion and relief can largely be tailored to fit the specific needs of a particular case.
It is important to note that a Canadian court cannot order a supplier to a debtor company to advance ‘further credit’ following the CCAA filing. Suppliers are entitled to payment on delivery. Also, if a party is not under a continuing legal obligation to supply or provide services, it cannot be compelled to supply the debtor following the filing, even if the debtor is prepared to pay on a cash on delivery basis. Thus, in certain circumstances, the court may authorise the payment of ‘pre-filing debt’ to critical vendors in order to induce them to continue the provision of goods or services to the debtor during the restructuring. There is no statutory authority in Canada to authorise payments of this nature; thus, the practice remains controversial as it appears that certain creditors are receiving preferential treatment.
In the case of an insolvency of an automotive parts supplier, a large proportion of these critical supplier payments (often referred to as hostage payments) are made to tooling vendors. The Tier I and Tier II suppliers will often act as a general contractor for building tools and outsource construction to specialised tool builders. As a result, critical supplier payments could be required to induce the contractor to finish or release the tools. This is of greater significance if the tools are needed for an upcoming product launch.Intellectual property disputes
Are intellectual property disputes significant in the automotive industry? If so, how effectively is industrial intellectual property protected? Are intellectual property disputes easily resolved?
Automotive companies generally own their own licences to use numerous patents, copyrights and trademarks on a global basis. Automotive companies typically have policies to protect their competitive position by, among other methods, filing international patent applications to protect technology and improvements that the companies consider important to the development of their business, including the filing of patents under the Canadian Patent Act.
Non-practising entities, more commonly referred to as ‘patent trolls,’ are a large issue in Canada. This is increasingly so in the automotive industry given the proliferation of communications technology in automobiles. Patent trolls typically acquire patent rights that are perceived to be infringed by the industry at large. Since the cost of patent litigation can be in the millions of dollars, patent trolls often propose a quick settlement that is less than the potential cost of litigation. A sophisticated intellectual property strategy - namely, having strong intellectual property protections in place - can minimise the effect of patent trolls.
Employment issuesTrade unions and work councils
Are there specific employment issues that automotive companies should be aware of, such as with trade unions and works councils?
With certain notable exceptions, most hourly workers in the Canadian automotive manufacturing sector are unionised. Unionised workers are covered by collective bargaining agreements, which are negotiated by the OEM and parts manufacturers periodically with various unions. Many automotive manufacturing workers are members of large unions such as Unifor (resulting from the 2013 merger of the Canadian Auto Workers Union and the Communications, Energy and Paperworkers Union of Canada, currently with over 300,000 members).
Collective bargaining agreements provide guaranteed wage and benefit levels and provide members with a significant level of job security. Unions have often negotiated with automotive companies in Canada for defined benefit pension plans and other benefits and perquisites that have significant employer costs. Unionisation and the terms of collective bargaining agreements may restrict the ability of automotive companies to close plants, divest businesses and outsource functions. Employment of unionised employees generally transfers automatically on the sale of a business, as the purchaser remains bound by the terms of the collective bargaining agreement in place at the time of the sale.
Aside from unionisation of automotive workers, Canadian employment law is unique. Unlike in some other jurisdictions, there is no ‘at-will’ employment in Canada. Absent valid contractual provisions limiting the employee’s termination entitlements to minimum statutory amounts, employees are entitled to ‘reasonable notice’ of termination or payment in lieu of such notice. Termination entitlements for employees tend to be much higher in Canada than in other jurisdictions. Also, on an asset transaction, the employment of non-unionised employees does not transfer automatically. Employees must be offered and accept employment with the purchaser. The defined benefit and defined contribution pension plans that are maintained by many Canadian employers to supplement the federal Canada Pension Plan may be subject to various federal and provincial legislation. Relevant to the acquisition of a Canadian automotive business, these rules govern such things as recognition of an employee’s past service and transfers of plan assets.
New technologiesLegal developments
What are the most important legal developments relating to automotive technological and mobility advances?
On 22 January 2019, Ontario’s Ministry of Transportation (Ministry) moved one step closer to a future with driverless vehicles by expanding its 10-year pilot project to test and evaluate the use of automated vehicles (AVs) on Ontario roadways. Effective 1 January 2019, eligible participants in the Automated Vehicle Pilot Program are permitted to remotely operate automated passenger and commercial vehicles and streetcars on public roadways without a passenger in the driver’s seat of the vehicle. Prior to this announcement, automated vehicles were only permitted on public roadways in Ontario if a driver was always seated in the driver’s seat of the AV and monitoring the vehicle’s operation. In addition, AVs equipped with Society of Automotive Engineers (SAE) international driving automation level 3 can now be driven on Ontario roads and are no longer restricted to pilot participants, subject to certain conditions.
At the same time, the Ministry announced a separate pilot programme for cooperative truck platooning. A cooperative truck platoon means two or more commercial motor vehicles that use an advanced driver assistance system and vehicle-to-vehicle communication system to travel in a convoy where the vehicles steer, accelerate and brake cooperatively and synchronously.
These announcements are in connection with the Ministry’s 10-year pilot project launched in 2016 to test and evaluate the use of AVs on Ontario roadways and the Autonomous Vehicle Innovation Network, established by the Ontario government to build upon Ontario’s position as a world-leading automotive manufacturing and supply jurisdiction.
At the federal level, Transport Canada is engaged in several initiatives relating to the safety and testing of automated and connected vehicles and published the following two documents in February 2019: Canada’s Safety Framework for Automated and Connected Vehicles; and Safety Assessment for Automated Driving Systems in Canada. These new reports complement work outlined in two other recently published documents: Automated and Connected Vehicles Policy Framework for Canada (released in January 2019 by the Council of Ministers Responsible for Transportation and Highway Safety), and Testing Highly Automated Vehicles in Canada: Guidelines for Trial Organizations (released in June 2018 by Transport Canada).
The authors would like to acknowledge the assistance of their colleagues in the preparation of this chapter, including Holly Reid.
Update and trendsRecent developments
Are there any emerging trends or hot topics in automotive regulation in your jurisdiction?No updates at this time.